loading

Loading

Baselayer Core

BASELAYER® CORE

The BASELAYER CORE line delivers state-of-the-art raised floor space, configurable in standardized increments of predictable capacity indoors and outside.

BASELAYER CORE C10


CORE C10 Data Module

The CORE C10 Data Module is a state-of-the-art, compartmentalized, raised floor data center space that delivers standardized increments of predictable capacity • Delivers up to 400 kW of Critical IT power and cooling for up to eighteen (18) 50U Cabinets @ N • Technology-agnostic design with 462 ft2 (42.9 m2) of available IT space.

Unit PUE Range
As low as 1.15
(Dependent upon Environmental and Operational Conditions)

Maximum Module Capacity
 
Maximum Available kW at 25 °F ∆T
@N
 
400 kW
@N+1
 
350 kW
@2N
 
200 kW

Maximum Module Density/Rack
 
Maximum Available kW
 
(18) 24″ (609 mm) Cabinets
(14) 30″ (762 mm) Cabinets
@N
22.2 kW/Cabinet
28.6 kW/Cabinet
@N+1
19.4 kW/Cabinet
25.0 kW/Cabinet
@2N
11.1 kW/Cabinet
14.3 kW/Cabinet

Security
Access Control
Open Compartmentalized Architecture, Enhanced Security Encryption, Versatile Interoperability, Proximity Card Readers (Keypad and Biometric Options Available), Layers of Physical & Logical Protection, Separate IT & Support Space Access
Camera
IP Based Camera
Door Locks
Electronic Locks

Fire System
Dedicated Fire System
Externally Accessible Fire Control Panel, Pre-Discharge Alarm & Strobe Lights, Fire Pull Station, Abort Hold Button and Keyed Bottle Disconnects
Smoke Detection
Intelligent Photoelectric Smoke Sensors
Fire Suppression
Clean Agent Fire suppression (Non-Ozone Depleting Agent)
Fire Rating
NFPA 72 Compliant and UL-Listed Fire Equipment
Exterior
Dimensions
US(Metric)
Length
Width
Height
42’ 8” (13.0 m)
11’ 8” (3.5 m)
13’ 5” (4.0 m)

Interior IT Space Dimensions US(Metric)
Length
Width
Height
42’ 0” (12.8 m)
11’ 0” (3.3 m)
8’ 5-1/2” (2.6 m)

Interior IT Space Area
462 ft2 (42.9 m2)
US(Metric)
Technology-agnostic design with 462 ft2 of IT space.
Cold Aisle = 4′ (1.2 m), Hot Aisle = 3’6″ (1.0 m)

Estimated Module
Shipping Weight
US(Metric)
52,000 lbs. (23,587 kg) (Excludes IT Cabinets and Equipment)

Standard IT Cabinets (Quantity)
18 x 24” (609 mm) Cabinets (Up to 50U)
14 x 30” (762 mm) Cabinets (Up to 50U)

Voltage/Frequency/Amperage
480 V, Three-Phase, 60 Hz/400 A
400 V, Three-Phase, 50 Hz/400 A

Incoming Power Feeds
Configurable Up To (4) 480 V, 400 A, 60 Hz, 3-phase or (4) 400 V, 400 A, 50 Hz, 3-phase.
Two 400 A feeds per PDU.

Power Distribution Unit
(2) 200 kVA PDUs

Cooling Type
Chilled Water, Air Handling Units (AHU)

Leak Detection
Spot Leak Detection




Download C10 Spec Sheet




core frontcore front
core frontcore front
core frontcore front

CORE DEPLOYMENT SCENARIO


BASELAYER CORE units are configurable in many deployment scenarios. This deployment delivers up to 1.2MW of Critical IT power and Cooling for up to fifty-four (54) 50U cabinets @ N redundancy.

BASELAYER deployments can consist of both power and data (IT) modules configured and tested from the factory with an enhanced integrated Module Control Unit (MCU) providing access to real-time module sensors. Power and cooling redundancy thresholds, along with analytics and historic trending, are all available through BASELAYERRunSmart OSdeployment module
SPECIFICATIONS & PERFORMANCE
Unit PUE Range
As low as 1.15 (Dependent upon Environmental and Operational Conditions)

Total Product Installation Footprint
3,207 ft2 (298.1 m2)

Critical IT Footprint
1,386 ft2 (128.8m2)

Minimum Facility Ceiling Height
19’4″ ft (5.89m)

Access Control
Open Compartmentalized Architecture

Dedicated Fire System
Each unit comes with an Externally Accessible Fire Control Panel and High Sensitivity Smoke Detectors

NFPA UI
NFPA 72 Compliant Designed to UI Tier III level parameters – Concurrently Maintainable